Coffee Shop Caps keep dirt and mud out of your Zero series cleats when you're off the bike, and give you traction when walking on uncarpeted surfaces. Made of high-traction molded polymer.
• Extends pedals • Not for use on exercise bikes
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
Origin-8's Pro-Fit UL Road Cleats are compatible with Shimano SPD-SL-style pedals. The Red offers 5 degrees of float, and the Black has no float (fixed position).
Replacement pedal pins for Chromag pedals. Includes 40 pins.
• Real leather material • Classic design fits most caged pedals
• City/road half clips • With reflectors • No straps needed • Resin
- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float).
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
• Nylon construction • Intended for use with double-strap toe straps (sold separately) • Includes mounting hardware • 36 grams per pair
The ultimate weight-saving upgrade. - The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present - Weight: 60g per pair - Spindle material: 6al/4v titanium - Max. rider weight: 200lb/90kg - Q-factor: 52 mm
- Compatible with all Spike & Oozy Pedals - Full Complement Sealed Bearing x 2pcs - Green Silicone Friction Seals - Replacement inboard bearings for your SPIKE or OOZY pedals.
Widen your Q-factor to 57mm. - Long spindles are 5mm longer than standard. - The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present - Weight: 112g per pair - Spindle material: forged SCM 435 chromoly steel - Q-factor: 57mm
Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included
$50.00 - $52.00
Sometimes after a a few seasons of punishing riding through mud, sand, and dust, your pedals need a little love to get them spinning smoothly again. iSSi's Spindle Rebuild Kit includes everything you need to get your iSSi pedals spinning just like new. Includes: • chromoly spindles • sealed bearings • bushings • spindle nuts • seals • iSSi branded end caps
Origin-8's Look Delta Cleats are compatible with Look Delta-style pedals.
$2.00 - $2.33 $9.90 - $10.99 Up To 82% Savings
- Service parts for Torsion-SX8 and Jive models - Rebuild kits include four Sealed bearings, two DU bushings and all Small parts
$3.80 $21.90 83% Savings
- Service parts for Torsion-SX8 and Jive models - Rebuild kits include four Sealed bearings, two DU bushings and all small parts
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
$15.99 - $19.99
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.
Crank Brothers' Quattro 3-Hole Cleats are the perfect cleats to use with your 3-hole compatible road shoes and Crank Brothers pedals. They're made from solid brass for crisp entry and exit, and durability.
Model Year 2015 and later SPIKE & OOZY Trail Pedals - 1 set L&R axle - 2pcs IGUS bushing - 2pcs O-ring - 2pcs dust cap - 2pcs stainless shim washer - 2pcs silicone friction seal - 2pcs lock nut
It's amazing what a fresh set of cleats will do for your ride, not to mention the health of your knees. Garmin's Vector Cleats offer six or zero degrees of float. • Compatible with all Garmin Vector Pedals
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability.
Rebuild kit for Race Face Aeffect pedals.
Bearing rebuild kit for Race Face Atlas pedals.
• Leather laminate with non-stretch inner layer • Steel hardware • Intended for use with double-strap toe clips (sold separately) • 140 grams per pair • 420mm length
Doubles represent the ultimate in toe strap comfort and performance. You won't believe how much more secure and comfortable they are than traditional singles until you've tried them yourself. Suddenly toe clips will make perfect sense, and you'll be riding with newfound confidence. - Leather with steel hardware - Intended for use with double-strap toe clips (sold separately) - 114 grams per pair - 420mm length
Page 1 of 4 Next page